seal for air conditioner, folding window

Product code: OKP

seal for portable air conditioner, folding window

A seal for a portable air conditioner, i.e. a folding window.

...you have a problem with letting out the air conditioner pipe in an aesthetic and functional way so that the room cools properly?....you bought a window sleeve for a tilting window and you are disappointed with this solution?....making a hole in the glass or wall is a difficult solution for you?

Buy our product and you will make a good investment for years of use.

The folding window is a product that completely solves the problem faced by users of portable air conditioners who have purchased the so-called window sleeve.

Window sleeves for portable air conditioners are difficult to use when we open and close the window frequently, and installing this product is a temporary solution that often cannot be installed properly when the window is leaky at the top and bottom.

An alternative to the standard solution above is our folding window.

You can assemble or disassemble the folding window into the pipe of a portable air conditioner: 1-2 minutes.

Tightness - very good, incomparable to window sleeves.

Elegant appearance, lightweight portable modular design.

Technical description:

White plastic, 4 mm thick, light, weather-resistant, consisting of modules.

Hole in one module with a diameter of 165 mm

Weight of the entire c.a. modules 1.5kg.

For example - WINDOW dimension:

h = 223.5 cm x 86.5 cm - 4 modules 55.5 cm x 86 cm

h = 135 x 114 cm - 2 modules 67 x 113.5 cm

After measuring the inside of the window, see which slot in the frame you could fit the folding window into, measure and subtract the c.a. 0.5 mm from the dimension. Give us the dimensions, we will give you the dimensions for your modules. We will make a hole for the air conditioner pipe in one module, where you can mount the module in the window any way you want, on the right or left side, the module on the top or bottom, etc.

If one of the modules is too large, there will be some connectors somewhere in the gap, something that will prevent you from inserting the board, you will be able to easily cut the material, cut it out with a utility knife, process it, adjust it even with scissors.
Write an e-mail - we will quickly send your order anywhere in the world